Solar & Battery Guides
How our battery savings calculator works (and what it can’t tell you)
A calculator is only as honest as its limits. Here is what ours does, step by step, and where it stops.
We built the battery savings calculator to give you a starting point, not an answer. It takes three quick questions. It hands back a suggested battery size, a range for the federal discount and a range for what you might save on your bill.
This post explains what goes in, what comes out, and why you should treat the result as a sensible first guess. If you’d like the longer path from questions to a priced package, we’ve covered that in How Build Your System works. We won’t repeat it here.
What the calculator asks
The questions are short on purpose. You shouldn’t need a pile of bills on the table.
1. Is your home single or three phase? The options are single phase, three phase or not sure. Phase is the supply to your home, and it limits which batteries suit. If you’re not sure, your switchboard or meter often says. Pick “not sure” and the calculator assumes single phase and says so in the result. We confirm it on site.
2. Roughly what’s your quarterly electricity bill? Pick one of four bands: under $400, $400 to $900, $900 to $1,500, or over $1,500. Prefer to be more exact? An optional “Know your daily usage or your rate?” drop-down lets you enter your average daily use in kWh and your usage rate. If you give a daily figure, it replaces the bill band. Neither has to be exact. A bill is only a rough guide to how much power you use.
3. Do you want backup power in a blackout? Yes or no. Your answer doesn’t change the suggested size or the estimate. It only shows up as a note on the result. Backup changes the wiring and equipment, so we look at it properly at your assessment.
What the result shows
You get three things.
A suggested battery size. It’s matched to the nearest battery we offer for your phase. You’ll see one size, plus the systems we offer around it (kWh range and brands). It’s a starting point rather than a prescription.
A federal discount range. Home batteries can get a discount under the federal Cheaper Home Batteries Program. It’s delivered as certificates, and the calculator shows a range because what certificates are worth can move. It’s a range, not a promise.
A savings range. This is an estimate of what the battery could take off your bill, shown with room either side. The calculator builds it from your bill, how much of your power you probably use in the evening and overnight, and how much of that a battery of that size could cover. It assumes your solar can fill the battery each day.
It’s sized from your bill, never from the discount
This is the part we care about most.
The calculator picks a battery size from your bill first. Only then does it work out the discount for that size. It never goes the other way. It doesn’t nudge you up a size to chase a bigger discount.
That matters because a bigger battery doesn’t earn a proportionally bigger discount. The federal certificates are tiered:
- 100% of the first 14 kWh of usable capacity counts.
- 60% of the next 14 kWh (above 14, up to 28) counts.
- 15% of the next 22 kWh (above 28, up to 50) counts.
- Nothing counts above 50 kWh.
So each extra kWh earns less than the one before it. If you buy a battery bigger than you’ll use, you pay for storage that sits idle, and the discount doesn’t make up for it. The right battery is the one that matches how you use power.
The factor is set by the install date
The certificate count depends on the battery’s usable kWh, the tiers above, and a factor. That factor steps down over time. Under the Clean Energy Regulator’s schedule it is 6.8 for installs from May to December 2026, 5.7 from January to June 2027, then 5.2 from July 2027, and lower every six months after that to the end of 2030.
The install date decides, not the date you sign. A contract signed in one month and installed in another is worked out on the install date. The calculator uses the factor in force on the day you use it, so if you come back after a change you’ll see a different number.
We’re not telling you when to act. We’re saying the number depends on a date, and you should know which one.
What an estimate can’t tell you
We’d rather be plain about this.
- It isn’t a quote. The numbers are indicative. A written quote comes after a site assessment.
- It can’t see your home. Your roof, switchboard, meter and network rules all affect what’s possible. We check those on site.
- It can’t see how you live. Two homes with the same bill can use power at very different times of day.
- It assumes your solar fills the battery. If you have no solar, or your system is small or shaded, the savings range may be too high.
- Tariffs change. What your retailer charges and pays for exported power can change. The calculator can’t know your next plan.
- The discount has conditions. The battery has to be new, on the Clean Energy Council’s approved list, installed by an eligible installer, able to join a virtual power plant if it’s grid-connected, and installed with a solar system of no more than 1 MW. Eligibility is subject to program requirements.
- A result that looks off is a reason to ask us. It isn’t a reason to trust it.
How to use it well
Run it once with your real bill. Run it again with the band above and below, and see how much the answer moves. If the suggested size barely changes, you can feel fairly settled. If it jumps around, talk to someone. Then bring the result to a conversation, not to a decision.
When you’re ready, try the battery savings calculator or read how Build Your System works. If you’d rather talk it through, book a consultation.
NRGPAL is a private business, not a government agency. Estimates are indicative and not a quote. Victoria only.
Frequently asked questions
Is the calculator a quote?
No. It’s an estimate to give you a starting point. A written quote follows a site assessment.
Does a bigger battery get a bigger discount?
Not in proportion. The federal certificates are tiered, so each extra kWh counts for less. The calculator sizes from your bill, then works out the discount.
Why does the discount number change?
The certificate factor steps down on set dates, and the install date decides which one applies. The calculator uses the factor in force on the day you use it.
Does the calculator work for three phase?
Yes. It has a three-phase option and sizes from three-phase systems. A three-phase inverter can’t go on a single-phase supply, so we confirm your phase on site.
What about blackout backup?
The calculator asks, but your answer doesn’t change the size or the estimate. Backup changes the equipment and wiring, so we assess it on site.
Do I need my bill handy?
It helps, but it doesn’t need to be exact. A bill band is enough for a first estimate.


